cam for 63 300hp - NCRS Discussion Boards

cam for 63 300hp

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Sander B.
    Expired
    • March 1, 2005
    • 499
    #16
      • Top

      Comment

      • Duke W.
        Beyond Control Poster
        • January 1, 1993
        • 15610
        #17
        Re: cam for 63 300hp

        I'm sure virtually everyone knows this but the 350 HP (L-79) engine used the 2.02/1.60" valve set and had a high performance HYDRAULIC lifter camshaft - 3863151 along with other differences including pistons, crankshaft, inlet manifold, torsional damper.

        Both the 300 and 350 HP engines used the same head castings (...461 through '66 and ...462 in 1967), but the 300 HP engine used the "standard" 1.94/1.50" valve set and the 3896929 camshaft, which was widely used in Corvettes, passenger cars, and truck small blocks from '67 through about 1980, so it is a very common cam - millions were produced for OE engines.

        The spec sheet is likely okay since it's from the manufacturer, but your retailer is completely confused about the specifics of the configurations.

        Duke
          • Top

          Comment

          Previous 1 2 template Next
          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"