purchased the 53-57 heater defr. switch from C S of Md. for the 54 hooked it up on the carpet did not install in dash yet to just check. One speed worked fine seemed to be the high and the other had a little of noise out of heater unit like was trying to go, switch got very hot and popped breaker. There are only two terminals on this, hooked fuse wire closest to fuse side term. and heater wire closest to heater side term. and this is with flat spot on switch facing down. was up. Brad
54 heater def. switch
Collapse
X
-
Re: 54 heater def. switch
[One speed worked fine seemed to be the high and the other had a little of noise out of heater unit like was trying to go, switch got very hot and popped breaker.}
make sure the heater motor has a GOOD ground or the motor bearing is sticking.- Top
Comment
-
Re: 54 heater def. switch
Sorry power has been out from storm. Roy, switch works fine hooking up both ways. (switching terminals). But only one speed. Seems I have only high because my 58 high sounds like only speed I have for 54 car. If I hook up one way It runs on the right side or high, if hooked up the other way it runs on the low side. It is just laying on the floor now for checking. Can motor alone from under hood be taken out and service the motor or do I have to dismantle everything, Dont want to do that if I dont have to. Thanks again Brad.- Top
Comment
Comment