64 anti-sway bar end links - NCRS Discussion Boards

64 anti-sway bar end links

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • George D. #31849

    64 anti-sway bar end links

    Can anyone please let me know the proper procedure to replace the front anti-sway bar end links in my 64? I want to make sure I do it right and I am quite the novice.
    Thanks
  • Dennis F. King

    #2
    Re: 64 anti-sway bar end links

    George
    This is a very easy job, safety is formost.Get a helper! You can put your car on ramps (best way) or up on jack stands. (chock the rear wheels). The main thing is don't let your suspension drop, so if you use jack stands place them outboard as much as possible under each lower control arm.It will go much easier with that helper. Before you release the nuts look at how the washers/bushings and spacers are stacked, then you and your helper do each side together. Reverse the procedure and your done. If your car is not being judged you can double nut the top nut to keep it from backing off.
    Good luck, have fun! Dennis

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"