C-1 C-2 or ? distributor - NCRS Discussion Boards

C-1 C-2 or ? distributor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Michael Ketterer
    #1

    C-1 C-2 or ? distributor

    HELP
    I have this dist that looks like a 1111011 that is NO VACUMM ADVANCE SLOT.
    it also has NO OIL HOLE that the 62 called for ((I believe thats correct for 62)).
    markings on the housing are upside down 1 1
    I was told that its a ZL-1 housing? Is that correct?
    Thanks Michael
    Tags: None
      • Top
    • Bruce B.
      Extremely Frequent Poster
      • May 31, 1996
      • 2930
      #2
      Re: C-1 C-2 or ? distributor

      The 1111011 is a mid to late 1962 Fuel injection distributor.
      It has no oil hole but a pressure feed oil line and is a centrifugal advance dist, therefore no vacuum advance.
      It has the drive for both a F.I. cable and a tach.
      Bruce B.
        • Top

        Comment

        • Michael Ketterer
          #3
          Re: C-1 C-2 or ? distributor

          Bruce
          Thanks then this distributor is not a 1111011. But has no vacume advance slot in the housing, also the oiling hole for the housing is on top of the shaft not the bottom or both as in some cases.
          Thanks
          Michael
            • Top

            Comment

            • Mike E.
              Extremely Frequent Poster
              • February 28, 1975
              • 5134
              #4
              Re: C-1 C-2 or ? distributor

              Michael--
              Is the tag a rectangular tag with the numbers stamped down in (debossed) and it has a date code on it? Does the unit have a cross shaft that drives a cable off of each end of it? That's what a 1011 should have. Plus, a 1011 should NOT have a vacuum slot--it's a dual point, centrifugal advance distributor.
                • Top

                Comment

                • Michael Ketterer
                  #5
                  Re: C-1 C-2 or ? distributor

                  Mike
                  Thanks, I believe that it is a 62 non FI housing, it has no tag ?!(people).
                  But the only oiling hole for the housing is at the top of the shaft of the housing unit itself.
                  I was told that its a ZL-1 housing, but ?? I have never seen one.
                  Thanks for the input.
                  Michael
                    • Top

                    Comment

                    • Howard Nardick
                      #6
                      Re: C-1 C-2 or ? distributor

                      The ZL-1/L-88 Corvette distributor #1111927 does have a vacuum advance can (ms 373-12), it serves no function other than to hold the TI magnet in place but the slot and advance are there. The over the counter ZL-1 distributor #1111263 had no slot for an advance can but has a ball bearing at the top instead of a standard bushing. Neither has a provision for oiling. What you have is probably a #1110985 dual poing dist, used on the `62 327/340hp and sold in the zillions over the counter by GM.
                      HN
                        • Top

                        Comment

                        • Mike G.
                          Expired
                          • July 31, 2002
                          • 709
                          #7
                          Re: C-1 C-2 or ? distributor

                          62 fi distributor. i have one myself.
                            • Top

                            Comment

                            Previous template Next
                            Working...

                            Debug Information

                            Searching...Please wait.
                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                            Please push the back button and reload the previous window.'
                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                            Please push the back button and reload the previous window.'
                            An internal error has occurred and the module cannot be displayed.
                            There are no results that meet this criteria.
                            Search Result for "|||"