66 327 K19 Hose issue - NCRS Discussion Boards

66 327 K19 Hose issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ryan S.
    Infrequent User
    • October 9, 2022
    • 16
    #1

    66 327 K19 Hose issue

    Tags: None
      • Top
    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193
      #2
      Re: 66 327 K19 Hose issue

      Originally posted by Ryan Stritzinger (69732)
      Long time listener, first time caller…I am working with my Dad on a restoration of my Grandpa’s ‘66 California car. We have found all of the hoses for the A.I.R. system with the exception of one. A short 5/8 ID ribbed heater hose with GM part number 3890406 (direct from AIM). I could not find one anywhere. Searched for weeks. I ended up just ordering a foot of ribbed heater hose and will cut it down. The only issue I have now is stamping the part number on there. Where can I go to get the right size part number stamp?
      Ryan------

      Have you checked Dr. Rebuild for the hose? They have a very wide selection of parts like these, many already GM part-numbered.
      In Appreciation of John Hinckley
        • Top

        Comment

        • Ryan S.
          Infrequent User
          • October 9, 2022
          • 16
          #3
          Re: 66 327 K19 Hose issue

          Joe,

          I messaged their email to see if they have either the hose or a stamp to help. Didn’t see anything at first glance. Thank you for the idea.

          Ryan
            • Top

            Comment

            • Ryan S.
              Infrequent User
              • October 9, 2022
              • 16
              #4
              Re: 66 327 K19 Hose issue

              Got back a great response from Doc Rebuild for anyone in the same boat I am:

              Sir
              5/8" heater hose will eventually burn through due to hot exhaust gas. I only have bulk straight hose for 66-67 models; none with GM part number imprints. It is high temp genuine emission - smog hose. If yours is formed - i.e. molded - none here - it will kink if bent sharply. If straight - what length?
              Note: 1st design smog hose is double extruded - meaning there is a layer of cloth between 2 layers of rubber. 2nd design - no cloth layer & that is what GM sold as bulk hose in 25 ft coils. 2nd design is superior to 1st in silicone rubber material composition for exhaust gas temps.
              DocRebuild
                • Top

                Comment

                • Paul S.
                  Very Frequent User
                  • June 30, 1982
                  • 354
                  #5
                  Re: 66 327 K19 Hose issue

                  TRY HODEL, GREAT GUY , KNOWS SMOG IN AND OUT
                  Bill Hodel
                  8257 Oxford Chase Circle N.W.
                  Massillon, Ohio 44646

                  Phone: 330-832-0871
                  e-mail: billhodel@sbcglobal.net
                    • Top

                    Comment

                    Previous template Next
                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"