75-7 Catalytic Converter Rear Hanger Brkt - NCRS Discussion Boards

75-7 Catalytic Converter Rear Hanger Brkt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alger R.
    Very Frequent User
    • September 30, 1999
    • 279

    75-7 Catalytic Converter Rear Hanger Brkt

    First part...Regarding the Hanger Bracket that connects the rear of the Converter, the Exhaust Pipe and the heat Shield to the Frame. What is the color of the Hanger and Special Washers riveted to the Rubber Dampers. Also, the loose Special Washers and Bolts that connect the whole thing to the Frame.

    Second part...Regarding the triangular Heat Shield that clamps in three places to the rear Y-Pipe. I'm looking for the clamps...Any help?
    AL
    75 Convertible
    L48 M20
    Bright Green / Saddle
  • Michael B.
    Expired
    • April 1, 1999
    • 178

    #2
    Re: 75-7 Catalytic Converter Rear Hanger Brkt

    Alger, I just got the 77 hanger (sits in front of the y-pipe, behind the catalyst) shipped from Denver. It was rusted (the hangers, washers) which means it was natural uncoated steel. The bolts looked like phosphate black.

    You can check with Keith at Corvel if he has clamps but I suspect he would have sent them to me as well. From the assembly manual the clamps look like the same type as may be available today from parts suppliers but I have to check for myself as well.

    Hope that helps.

    Michael B.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"