I checked the archives but could not find an answer. While replacing the carpet in the back of my coupe I purchased the mastic backed jute pad. This covers all of the two wheel wells, the bottom and the back wall. Following the AIM I cut the holes for the tray hinges (there are no plugs or holes for plugs in my car). The problem I have is that the storage compartment frame will not fit. The outside of the frame is 36 1/8 wide (left to right) and the wheel wells are 36 1/2 apart. So there is only 1/4" space for the carpet on both ends and not 1/2" thick jute on each end.
Does anyone know what the unerlayment looked like on the wheel wells? I suspect that it stopped above the shoulder belt bolt and did not cover the vertical part of the wheel well near the storage compartments. The originals were lost and not documented and the AIM does not detail the jute.
Also, does the jute go all the way up the back wall? This seems to make the window tray fit really tight.
Russ
Does anyone know what the unerlayment looked like on the wheel wells? I suspect that it stopped above the shoulder belt bolt and did not cover the vertical part of the wheel well near the storage compartments. The originals were lost and not documented and the AIM does not detail the jute.
Also, does the jute go all the way up the back wall? This seems to make the window tray fit really tight.
Russ
Comment