Bellhousing Bolts -C2 - NCRS Discussion Boards

Bellhousing Bolts -C2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Larry S.
    Expired
    • September 19, 2007
    • 204

    Bellhousing Bolts -C2

    I am wondering if the bell housing bolt heads should be painted the same orange as the bell housing, or should they be just a natural finish (Zinc I guess)? Also, what letter if any should be correct for the head of these bolts? This is an early 1966 427-450HP car.
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: Bellhousing Bolts -C2

    Originally posted by Larry Schuyler (47889)
    I am wondering if the bell housing bolt heads should be painted the same orange as the bell housing, or should they be just a natural finish (Zinc I guess)? Also, what letter if any should be correct for the head of these bolts? This is an early 1966 427-450HP car.

    Larry------

    The were usually painted with the engine and bellhousing. The bellhousing was almost always painted in the area of the bolts, so they got painted. The bolts, themselves, were zinc plated. "A" or "M" were common headmarkings.
    In Appreciation of John Hinckley

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"